Tesla Air Cavitation

Radiant Energy Generator (TACREG)

  1.REQUIRED COMPONENTS:

    1.1 “Chimney,” non-conductive;

    1.2 Collector-electrodes;

    1.3 Spark-gap device;

     1.3.1 resonator, spherical electrodes, dissimilar metals;

        1.3.1.1 telescoping pipe-mount (“tuning” the “helmholtz” response of spherical electrodes);

    1.4 High-voltage Direct Current, frequency controllable power supply;

    1.5 Output transformer.

WHY IT WORKS

  2. The TACREG is made possible by the creation of high frequency (10kHz – 40kHz) interruptions to a high voltage DC current. Tesla discovered that such DC pulsations caused energy to transit from the vacuum of the Universe, to a locally created vacuum bubble. The secret of cavitation.

HOW IT WORKS

  3. With correctly shaped and dissimilar metals electrodes, (spherical), and resonating at the right “tuned” frequency, high temperature plasma arcs (sparks) jump the gap between the electrodes (spark gap). Each spark thus generated is a miniature lightning bolt.

  4. Each spark generates a temperature as high as 18,000 degrees Fahrenheit.

  5. Air exposed to such temperatures instantly accelerates away from the spark.

  6. When the air evacuates the local area surrounding the spark, a vacuum bubble is formed.

  7. The presence of the vacuum bubble causes the surrounding high pressure air to accelerate into the vacuum at such speed that the speed of sound is exceeded and an audible “report” can be discerned.

  8. As the matter of the surrounding air penetrates the vacuum bubble, a compression wave is created which causes a secondary vacuum bubble, another plasma discharge and additional generation of heat.

    8.1 This phenomenon can be seen in a video about the Pistol Shrimp.

     8.1.1 Goto: http://nrgnair.com/MPT/02AIR/pistol.shrimp.htm and review the 1 minute 34 second video to witness this sequence taking place in nature.

  9. The action of the heat energy on elements in the air that are passing through the spark gap during spark generation, causes some of the elements in the air to disassociate (hydrogen [H₂] being one such element), immediately after disassociation occurs, the atoms re-combine causing an additional energy release.

    9.1 See article about Dr. Irving Langmuir, (Atomic Hydrogen) at: http://nrgnair.com/MPT/02AIR/ahbt.htm.

  10.  The spark-caused reactions and modification of the elements in the air, changes the properties of some elements to such an extent that as the modified elements in the air flow up the “chimney” of the TACREG, the negative and positive particles are attracted to their opposite polarities created by permanent magnetic fields induced into the collector-electrodes at the top of the TACREG “chimney.”

    10.1 (See illustration).

ENHANCEMENTS

  11.  “Sympathetic vibrations,” (a frequency that causes components of the TACREG assembly to resonate), can be injected into the components of the assembly that will enhance the efficiency of the transference of energy from the vacuum in order to cause energy release and capture of that energy by the pick-up electrodes at the top of the “chimney.”

  12.  “Shape power,”

    12.1 “helmholtz” resonator spheres as spark-gap electrodes

    12.2 configuration of the “chimney” walls to enhance the free-flow of air past the collector-electrodes

    12.3 “flask-shaped” collector electrodes (helmholtz resonators) and adjustment screws for tuning.

TACREG 3D
	A Cylindrical “Chimney” Cutaway B Collector Electrodes C Polarizing magnets D Spark Electrodes E Output Transformer Primary Coil F Air-Flow through “Chimney” G “Schauberger” “Rifling” (causes vortex air flow)
	B1 North Polarized Collector Electrode B2 South polarized Collector Electrode C1 “North” Polarizing Magnet C2 “South” Polarizing Magnet B1 and B2 are “flask” type electrodes. (Hollow inside). The center pipe is adjustable for tuning the resonance of the electrode.